Omega RD200 Uživatelský manuál stáhnout pdf (Strana 73)

－６９－

11. OTHER PROGRAMMING

11.8 Engineering Units

Engineering units up to 5 digits can be assigned for digital data printing and scale printing.

Press and simultaneously to display [Engineering unit] programming screen.

(Digital data printing) (Scale printing) (List printing)

1 In case no engineering unit is programmed;

An engineering unit is decided by the range number programmed in the [Range/Printing range] programming.

Voltage range Temperature range

(01 to 05)

(06 to 10)

°C

(Nos. other than ones

shown on the right)

(47, 80)

2 Programming Mode

  

*1: Engineering unit character

The character at the digit where the digit number is pointed by the cursor is displayed.

*2: Digit No. of engineering unit character

A digit No. 1 to 5 is displayed by pressing .

Press and simultaneously to clear the digit No. and press for reprogramming a

new digit No.

A programmed engineering unit is deleted and

the engineering unit determined by the range

No. is displayed

If the scale is cleared in a channel; the

engineering unit of this channel is deleted, and it

becomes the engineering unit determined by

range No.



単位印字の例

Examples of engineering unit printing

If clear is stored at scale programming;

If the range No. is changed;

SHIFT

UNIT

°F

SHIFT

CLEAR

Engineering

unit characte

Digit No. of engineering unit character *2

(

to 5 di

its.

)

(Fixed)

(Numeric numbers (1 to 5) appear for the digit not programmed by pressing .)

Channel

Curso

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 133 134

Komentáře k této Příručce

Žádné komentáře

Omega RD200 Uživatelský manuál Strana 73

Komentáře k této Příručce